02-03-2017 03:59 AM - edited 03-12-2019 01:52 AM
Hi,
My Standby ASA5520-AIP20-K9 is faulty, Cisco suggested alternate part as ASA5520-K8
^^^ASA 5520 Appliance with SW, HA, 4GE+1FE, DES ;
Please Note: ASA5520-K8 ship from Service does come with ASA5500-CF-256MB=
My query is, will the alternate part work in HA, where my Active model is ASA5520-AIP20-K9
Solved! Go to Solution.
02-03-2017 05:47 AM
The question is: What exactly is faulty? The ASA or the IPS module? If it's the ASA, then the replacement part is fine but you have to move the IPS-module from the old to the new ASA. And you need to get a new
If it's the IPS-Module, you need a replacement for that.
And you also could see this failure as a sign that it's time to migrate to an ASA-X model with FirePower. ;-)
02-03-2017 05:47 AM
The question is: What exactly is faulty? The ASA or the IPS module? If it's the ASA, then the replacement part is fine but you have to move the IPS-module from the old to the new ASA. And you need to get a new
If it's the IPS-Module, you need a replacement for that.
And you also could see this failure as a sign that it's time to migrate to an ASA-X model with FirePower. ;-)
02-03-2017 03:05 PM
Although not recommended, failover would still work with different compact flash size:
http://www.cisco.com/c/en/us/td/docs/security/asa/hw/maintenance/guide/asa_hw/overview.html
-
AJ
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide