cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
Register for the monthly ISE Webinars to learn about ISE configuration and deployment.
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

309
Views
0
Helpful
2
Replies
Cisco Employee

ISE Posture disk encryption check for all drives

Hello,

Is it possible for ISE to check all internal drives for disk encryption? Currently you can specify to check system location or a specific location, is there anyway ISE could check all the drives or at least those supported by the encryption software?

Thanks, Eric

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: ISE Posture disk encryption check for all drives

It will be possible in ISE 2.4

2 REPLIES 2
Highlighted
Cisco Employee

Re: ISE Posture disk encryption check for all drives

It will be possible in ISE 2.4

Cisco Employee

Re: ISE Posture disk encryption check for all drives

Thanks Imbashir,

Follow up question what mechanism does ISE use to scan all internal drives, does it query all the mapped drives against the encryption software? Will it simply skip un-encryptable drives such as cdrom drives?