09-26-2022 07:32 AM
Hello guys.
I'm having problems with my Cisco FTD 2140, at the moment of enabling the interfaces with SFP module.
In the image below can see that when I enable the interface, it sends me that message.
I'm using the interface Ethernet 1/13 with a SFP module.
10-11-2022 01:51 AM - edited 10-11-2022 01:52 AM
Hello @Alen.
Based on your screenshot and the problem description, you might be hit with this bug.
Could you please try the workaround and see if it solves the problem?
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvq01485
-----------------------------------------
You can also learn more about Secure Firewall (formerly known as NGFW) through our live Ask the Experts (ATXs) session. Check out Cisco Network Security ATXs Resources [https://community.cisco.com/t5/security-knowledge-base/cisco-network-security-ask-the-experts-resources/ta-p/4416493] to view the latest schedule for upcoming sessions, as well as the useful references, e.g. online guides, FAQs.
-----------------------------------------
10-11-2022 03:14 AM
Are you trying to install a 10G SFP or 1G? 10G SFPs are not supported on the 2100 FTDs. However, if you are trying to install a 1G SFP, could you please share the interface hardware settings for review? Also, you can connect to fxos and show the interfaces details including port channels as follows:
- connect fxos
- scope eth-uplink
- show detail expand
Alternatively, if you only want to list the interfaces that are not part of the port channel then you can do this:
- connect fxos
- scope eth-uplink
- scope fabric a
- show interface expand detail
12-09-2022 07:17 AM
FP 2130 and 2140 does support 10G SFP+ modules.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide