cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2831
Views
10
Helpful
5
Replies

ISE - Adaptive Network Control capability

sindan
Level 1
Level 1

Hi, running ISE-PIC v2.2 - Adaptive Network Control capability shows "Disabled". How can this capability be "enabled"?

 

Thanks,

1 Accepted Solution

Accepted Solutions

Francesco Molino
VIP Alumni
VIP Alumni
Hi

This service is enabled when pxgrid is enabled and stays on unless you manually disable it from UI.

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

View solution in original post

5 Replies 5

Francesco Molino
VIP Alumni
VIP Alumni
Hi

This service is enabled when pxgrid is enabled and stays on unless you manually disable it from UI.

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

hi Francesco, thanks for your answer. the pxgrid is already enabled and integrated with two other Cisco products, however the ANC feature shows "Disabled" under "pxGrid services - Capabilities" 

Can you share please a screenshot?

image.png

 

 


Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

hi Francesco, thanks for looking into this, according to TAC hitting a bug, upgrade recommended,

Ok great. Thanks for letting me know. this was the next obvious step :-)

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question