What could be the issue when a link connected to 2 WAN port IP 10.234.253.129 does not come up on the production router but works on a test router.
The config on the 2 WAN port are okay.
ken-nai-edc-pe01#ping vrf voas001 10.234.253.129 rep 50
Type escape sequence to abort.
Sending 50, 100-byte ICMP Echos to 10.234.253.129, timeout is 2 seconds:
...................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Success rate is 62 percent (31/50), round-trip min/avg/max = 1/1/2 ms
ken-nai-edc-pe01#clear arp-cache vrf voas001 10.234.253.129
ken-nai-edc-pe01#sh arp vrf voas001
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.234.253.128 - 7c0e.ce0d.f603 ARPA GigabitEthernet0/0/3.582
Internet 10.234.253.129 0 Incomplete ARPA
ken-nai-edc-pe01#
ken-nai-edc-pe01#ping vrf voas001 10.234.253.129
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.234.253.129, timeout is 2 seconds:
.....
The router is also connecting another link which is working fine.
