05-06-2009 01:20 PM - edited 03-10-2019 04:28 PM
hello ,
i have a problem with one of the devices,6513 switch. the acs server is directly connected to the switch inside fwsm.
i am able to ping the ACS server from MSFC and inside FWSM , but it not taking the ACS. i have other 6513 and many other switches and router that integrated normally with ACS.
Please i need some help.
Regards,
Solved! Go to Solution.
05-07-2009 02:01 PM
Incase you are using tacacs and issue " ip tacacs source interface command "
User the interface which is listed in acs network configuration --->switch--->IP address
Switch should use that IP address as source for tacacs packets
Regards,
~JG
Do rate helpful posts
05-07-2009 02:01 PM
Incase you are using tacacs and issue " ip tacacs source interface command "
User the interface which is listed in acs network configuration --->switch--->IP address
Switch should use that IP address as source for tacacs packets
Regards,
~JG
Do rate helpful posts
05-08-2009 01:58 AM
Thank you JG, that was very helpful.
Regards,
George
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide