cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
277
Views
0
Helpful
1
Replies

802.1x EAP-TLS configuration for C3550

kuber.saini
Level 1
Level 1

Hi,

I am using freeradius on ubuntu as authentication server and configured authentication method as EAP-TLS  and wpa_supplicant on OpenWrt on a router as supplicant and configured accordingly.

Can any one suggest 802.1x EAP-TLS configuration for C3550 switch?

Thanks in advance.

1 Reply 1

nspasov
Cisco Employee
Cisco Employee

I am not familiar with freeradius but you can use most of the configs from the Cisco TrustSec guide:

http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_10_universal_switch_config.pdf

I hope this helps!

Thank you for rating helpful posts!