Hi
Apologies in advance this is probably trivial but I'm learning.
I'm working on a Cisco lab (packet tracer) and I have been tasked with creating an ACL with the following parameters :
I am struggling to grasp the concept of what I should use where, I understand I should place the ACL on the interface closest to the destination? and I understand the concept of implicit deny, am I on the right tracks here?
Network 172.10.0.32/28 and 172.10.0.0/27 should be able to communicate via the VPN without restrictions
access-list 110 permit ip 172.10.0.32 0.0.0.15 172.10.0.0 0.0.0.255
access-list 110 permit ip 172.10.0.0 0.0.0.255 172.10.0.32 0.0.0.15
Network 172.10.0.32/28 should be able to communicate with 172.10.0.51 without the VPN
access-list 110 permit 172.10.0.32 0.0.0.15 172.10.0.51 0.0.0.0
Network 172.10.0.32/28 should be able to communicate with 209.165.100.97/27 only if the communication is issued by a user of the 172.10.0.32/28 network
209.165.100.97/27 Devices can only communicate with 172.10.0.51 via HTTPS Communication.
access-list 110 permit tcp 172.10.0.32 0.0.0.15 eq 443
Many thanks in advance