cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1420
Views
0
Helpful
1
Replies

ACS 3.1: CSTacacs service failure on W2k SP3

marcjone
Level 1
Level 1

Hi all

We are experiencing problems with our ACS server, whereby the CSTacacs services fails and the following errors are generated in the 'Event Viewer':

1) From the 'Application Log', in 'Event Viewer':

CSTacacs could nto be started. Failed to initialize Crypto module (service specific error 69)

2) From the 'Application Log', in 'Event Viewer':

The CSTacacs service terminated with service-specific error 1066

We have seen this problem a few times recently, and on the last occasion, I had to reboot the server in order to get the services running again

Fortunately, we are also running a Secondary ACS server, however, I am being asked to explain what is happening here !

This looks similar to CSCeb11405 - CS services cannot be started, however, we do not running any Access Points on this network ...

Any ideas ?

Many thanks in advance for any help

Kind regards

Marcus

1 Reply 1

beth-martin
Level 5
Level 5

Cisco Secure ACS comprises several Windows NT/2000 services. The Service Control page provides basic status information about the services, enables you to configure the service log files, and to stop or restart the services.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/csnt30/user/s.htm#35262