Hi,
We have Cisco ACS version 4.2 running and would like to integrate with bluecoat AV for management users authentication and authorization using VSA attributes. These attributes are by default not available in ACS, details are in attached file. So we are trying to use accountactions.csv file using RDBMS sync to upload these VSA into ACS but unfortunately it is not uploading.
Below is the ACS error logs while upload. Also attached is the CSV file which we were tried. Please someone lookinto this and suggest.
Date  | Time | AAA Server | status-class | text-message |
|---|---|---|---|---|
| 18/12/2012 | 15:37:57 | CISCO_ACS | ERROR | Sync complete: 1 transaction(s) 1 parse error(s) 0 process error(s) |
| 18/12/2012 | 15:37:57 | CISCO_ACS | ERROR | Parse Error: Reason - Value has incorrect format [SI=1 A=163 UN="ndalg50" GN="" AI="" VN="Vendor-Specific" V1="BlueCoat" V2="" V3=""] |
| 18/12/2012 | 15:36:06 | CISCO_ACS | ERROR | Sync complete: 1 transaction(s) 1 parse error(s) 0 process error(s) |
| 18/12/2012 | 15:36:06 | CISCO_ACS | ERROR | Parse Error: Reason - Value has incorrect format [SI=1 A=163 UN="ndalg50" GN="" AI="" VN="Vendor-Specific" V1="BlueCoat" V2="" V3="14501"] |
| 17/12/2012 | 22:54:00 | CISCO_ACS | ERROR | Sync complete: 1 transaction(s) 1 parse error(s) 1 process error(s) |
| 17/12/2012 | 22:54:00 | CISCO_ACS | ERROR | Parse Error: Reason - Value has incorrect format [SI=1 A=163 UN="ndalg50" GN="" AI="" VN="Vendor-Specific" V1="Blue-Coat-Authorization" V2="" V3="0"] |
| 17/12/2012 | 22:50:59 | CISCO_ACS | ERROR | Sync complete: 1 transaction(s) 1 parse error(s) 0 process error(s) |
| 17/12/2012 | 22:50:59 | CISCO_ACS | ERROR | Parse Error: Reason - Value has incorrect format [SI=1 A=163 UN="ndalg50" GN="" AI="" VN="Vendor-Specific" V1="Blue-Coat-Authorization" V2="" V3="0"] |
| 17/12/2012 | 22:43:32 | CISCO_ACS | ERROR | Sync complete: 1 transaction(s) 1 parse error(s) 0 process error(s) |
| 17/12/2012 | 22:43:32 | CISCO_ACS | ERROR | Parse Error: Reason - Value has incorrect format [SI=1 A=163 UN="ndalg50" GN="" AI="" VN="Vendor-Specific" V1="Blue-Coat-Authorization=No-Access" V2="" V3="0"] |
| 17/12/2012 | 22:41:27 | CISCO_ACS | ERROR | Sync complete: 1 transaction(s) 1 parse error(s) 0 process error(s) |
| 17/12/2012 | 22:41:27 | CISCO_ACS | ERROR | Parse Error: Reason - Value has incorrect format [SI=1 A=163 UN="ndalg50" GN="" AI="" VN="Vendor-Specific" V1="Blue-Coat-Authorization =No-Access" V2="" V3="0"] |
Regards,
Ravi
we managed to upload using action code 350, 352 but still authorization is not working. Authentication is fine. Bluecoat AV is keep on prompting for credentials.
Below is ACS screens after uploading UDV VSA.
Please suggest.
