ACS 5.0 with windows AD
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-08-2011 11:27 PM - edited 03-10-2019 06:09 PM
Hi,
I searched cisco documents where as all the documents are having example of ACS 4.0 but i am very keen to know with ACS 5.0 integrated with AD.
If anyone could give me document especially with ACS 5.0 , it would be great for me to understand the ACS 5.0 set-up.
- Labels:
-
AAA
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-11-2011 08:40 PM
This document is more about setting up CA, but has a little about AD.
http://www.cisco.com/image/gif/paws/112175/acs51-peap-deployment-00.pdf
Hope it helps some.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2011 09:09 AM
HI Matt
What things is necessary to configure 802.1X EAP PEAP with cisco acs 5.2 + active directory, in the active directory and the cisco acs?
cisco acs 5.2 working very well with active directory 2008 r2?? or is not possible work with it.
Thanks
Regards
IVAN
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-12-2011 08:48 PM
Hi Ivan,
This is a AAA issue, so moving to AAA forum for faster response.
thanks,
Vinay

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-13-2011 03:51 AM
Hi Ivan,
Configuring PEAP with ACS 5.1
http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080b4cdb9.shtml
ACS 5.2 does support windows AD running OS 2008 R2
You may check the release notes for ACS 5.2 under ACS resolved issue.
CSCtg12399 | ACS 5.1 did not support 2008 R2 Server for AD. |
In order to integrate ACS with AD, all you need a service account from the AD to have privileges to add computer object.
Regards,
Jatin
Do rate helpful posts-
