ACS 5.2 custum attributes

[Daryn Utesbayev]

Hi everybody

Speaking generally I have question about tacacs + custum attributes, On ACS 4.2 the custom attribute is written for cisco CRC. But on ACS 5.2 has deferent attributes and how I can configure on ACS 5.2 custum attributes.

Thank you for helping!!!

[Jatin Katyal · Accepted solution]

TACACS+ Custom Attributes from ACS 4.x to 5.x

The format of TACACS+ Custom Attributes are slightly different between ACS 4.x and 5.x

In ACS 4.2 there is just one field which has a combination of;

Attribute, (whether it is Mandatory or Optional) and the Value.

Using an example from ACS 4.2

In the Custom Attribute box "access*touch"

So in ACS 5.x it will be entered as;

Attribute - access

Requirement - Optional

Value - touch

Another example;

In the Custom Attribute box "access=touch"

Attribute - access

Requirement - Mandatory

Value - touch

"*" means optional and "=" means mandatory

Jatin Katyal
- Do rate helpful posts -

[Daryn Utesbayev]

Thank you for helpling Jatin. A lot

if i have on acs 4.2

task*#cisco-support,#root-system

how can i write this on ACS 5.2 ?