ACS 5.2 % Error in authentication.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-23-2014 06:49 AM - edited 03-10-2019 09:39 PM
hello to all
I am trying to deploy ACS 5.2
Below my configuration switch:
!
username admin privilege 15 password 7 03055F060F012C4B
cfaotech username privilege 15 password 7 110A1F2547
!
!
!
aaa new-model
aaa group server radius 8021x
10.32.10.47 auth server port 1812 acct port 1813
!
aaa group server tacacs + CLI
server 10.32.10.47
I've created local account and groups.
- Labels:
-
AAA

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-25-2014 12:05 AM
Can you share "show run | in aaa" from the switch?
You should have the below listed commands on the switch:
aaa authentication login default group CLI local
aaa authorization exec default group CLI local
On the ACS you should push priv-lvl=15
You may go through the below listed document for better understanding:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113590-acs5-tacacs-config.html
Regards,
Jatin Katyal
*Do rate helpful posts*
