ACS 5.3.0 configuraition guide (AAA services)

[Fazal E Rasool Khan]

Hello Everyone,

I tried to find the configuration gudie for ACS 5.3.0.40 Version but i found only upto 4.2 version (http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/acs42_config_guide.html)

It will be helpful if any docmentation or links provided for 5.3.0 version specially related to  Authorization and Accounting.

Thanks.

[Tarik Admani]

Hi,

The documentation section changed in the recent releases.

Try going to www.cisco.com/go/acs an look under the user guides. That is where the configuration docs ate located.

[Fazal E Rasool Khan]

I already check the user guide it does not have much information. there is not much GUI screen shots.

(http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/ACSuserguide.pdf)

Hope more documents will be available for it.

[Fazal E Rasool Khan]

Thanks for the reply Tarik,

I configured the authentication for the devices, i want to configure the authorization and accounting rules for the devices.

I want to know the syntax for it.

I create shell profile under device administration and added it to the default device admin but still the permit access rule match and it hit counts increases.

i want create on authorization rule lets say for privilege level 5 with some commands. In 4.2 it was very easy but here whole interface changed.

I want to do basic accounting ALSO.

following configuration is done for authorization.

aaa authorization config-commands

aaa authorization exec default group tacacs+

aaa authorization commands 0 default group tacacs+

aaa authorization commands 1 default group tacacs+

aaa authorization commands 15 default group tacacs+

Kindly help in this regard.