07-05-2012 06:00 AM - edited 03-10-2019 07:16 PM
Does anyone have a good walkthrough on how to setup ACS 5.3 to authenticate wireless users over radius? I currently have the SSID pointing to a Microsoft IAS server and would like to move the authentication to be done via ACS.
Thanks,
Chris
07-05-2012 07:16 AM
If you are using active directory then this is a good doc
https://supportforums.cisco.com/docs/DOC-21679
If you use internal user DB you need to choose the local user identity rather than the AD identity.
HTH
Amjad
Sent from Cisco Technical Support iPad App
04-04-2014 05:18 AM
Hi,
This is my first time to login into Cisco support community. I am facing ACS authentication issue in IPAD, if someone can help to resolve this.
Issue: IPAD is not authenticating from ACS Internal user database.
Requirement: IPAD user's authentication should be from ACS 5.3 Internal user database.
Current Configuration: Domain user's are authenticating from AD as a machine authentication, using PEAP (MSCHAP-V2). I have configured access policy for domain users. Due this configuration domain user's can login into IPAD also which we don't required. I do not understand why IPAD is using PEAP (MSCHAP - V2) while it is not a domain system. Can any one suggest how to block IPAD authentication from AD and should authenticate from ACS local user database.
Thanks
Kamlesh Negi
04-07-2014 12:26 AM
please refer the configuration guide:
http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series/44844-leapserver.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide