cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

291
Views
0
Helpful
1
Replies
Highlighted
Beginner

ACS 5.4 Management-if

Hi all,

ACS5.4 is the first ACS5.* version which support multiple Ethernet Interfaces for AAA authentication. Cisco explained, that only one interface can be used as management interface. This interface is always eth0.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/release/notes/acs_54_rn.html#wp225769

I have tested this with an VMware machine and two interfaces. In my environment it is possible to connect via ssh and authenticate via tacacs and raduis on both interfaces. The management web-gui is only available in interface eht1, and not what cisco explained.

I have searched many cisco documents, to find out how to configure the primary web-gui interface, but i always found the explanation that this will be eht0.

Has anyone an idea how to switch this?

Thanks for help.

Everyone's tags (3)
1 REPLY 1
Highlighted
Enthusiast

ACS 5.4 Management-if

If it works in the same way ISE does, you can't change where the GUI maps to... it's always Eth0.