cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

320
Views
0
Helpful
3
Replies
Andrew Mathu
Beginner

ACS 5.4 Saving Problem and Shell Profile Problem

Hi,

We currently have an ACS Version : 5.4.0.46.0a Internal Build ID : B.221. 

Issue 1:

When I make changes on the web user interface I noticed that they do not take effect .I always have to reboot the ACS for the changes to take effect.

 

Issue 2:

 

I have created authorization rules for Tacacs. I have three rules based on three different shell profiles: Privilege level 15, Privilege level 7 and Privilege Level 1. Whenever we try to authenticate it always goes to the default rule which is deny access. Is there a way we can force the three rules to be used?

I have checked the identity stores and the rule are pointing to the correct store.

 

1 ACCEPTED SOLUTION

Accepted Solutions
alek.gozali
Beginner

Hi,

Issue 1 :
please try to patch 5.4.0.46.6 or the latest patch

Issue 2 :

did you already enabled the rules? ( not monitor only / disabled )

did reboot the ACS will take the rules effect?

if yes, please try to patch it.

 

View solution in original post

3 REPLIES 3
alek.gozali
Beginner

Hi,

Issue 1 :
please try to patch 5.4.0.46.6 or the latest patch

Issue 2 :

did you already enabled the rules? ( not monitor only / disabled )

did reboot the ACS will take the rules effect?

if yes, please try to patch it.

 

View solution in original post

Hi,

 

I uploaded the patch and it seemed to work for a while before the issue recurred.

However the client will be upgrading to version 5.6 which I believe will solve the problem permanently.

Thanks for the assistance.

 

Regards,

Andrew

 

Dominic Stalder
Enthusiast

Hi

we had the same problem (issue 2) yesterday and had always to reboot ACS 5.3 whenever we made some changes in the authorization policies (rules did not apply even if the conditions were true).

We then decided to upgrade to ACS 5.6 and now these problems are gone.

Regards

Dominic

Content for Community-Ad