Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
We have an ISE deployment running ISE version 2.3. We recently deployed ISE patch five to the setup. Afterwards, only the Primary admin node became connected. Under Administration > Deployment, the rest of the nodes show "Not in Sync" with a...
Hello All,
We are running ISE version 2.3 with patch 3. We have installed the following Anyconnect and Compliance Modules:
anyconnect-win-4.5.03040-core-vpn-predeploy-k9
anyconnect-win-4.5.03040-iseposture-predeploy-k9
anyconnect-win-3.6.11682.2-is...
Hi,
We have configured a Cisco ASA 5555-X with FirePOWER version 6.0.0.1. The ASA firewall has an ASA OS version 9.2(2)4.
This FirePOWER module has been configured with Protect, Control and AMP (TAM License).
From the management center, health moni...
Hi,We currently have an ACS Version : 5.4.0.46.0a Internal Build ID : B.221. Issue 1:When I make changes on the web user interface I noticed that they do not take effect .I always have to reboot the ACS for the changes to take effect. Issue 2: I have...
Hi Guys,I have a voice gateway with an E1 card and two 4 port FXO ports. The system has been configured such that when one calls outside starting with a nine(9) the call is routed out throught the E1. When one dials with an 8 it passes through the FX...
Hi Kaisero,
When we look at the CPU utilization, the process snort (user - sfsnort) is using the most CPU. We'll try and restart the process after production hours.
Regards,
Andrew
Hi ilukeberry,
Thanks for the reply. We will try and upgrade to a version greater than 9.4.X and observe if this helps. However, we have other firewalls running 9.2(2)4 and FirePOWER 6.0.0.1. and they have no CPU spikes. Coould it be a configuration...
Hi, I uploaded the patch and it seemed to work for a while before the issue recurred.However the client will be upgrading to version 5.6 which I believe will solve the problem permanently.Thanks for the assistance. Regards,Andrew