cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
287
Views
0
Helpful
2
Replies

ACS 5.5.0.46.6 and NEAT Problems

hdussa
Level 1
Level 1

Hi,

We´re using a lot of NEAT-Switches. They all configured with the same username and password.

Sometimes when we connect a new one, an other one, already working fine, looses connectivity. Both switches are connected to WS-C3750-48TS-E (Stack). IOS = c3750-ipservicesk9-mz.122-55.SE7.bin. The port shows up/up but no packets will be transfered. RESTART is neccessary.

Is there a limit how often a switch with the same credentials can be used.

 

Horst

 

2 Replies 2

Kanwaljeet Singh
Cisco Employee
Cisco Employee

Hi Horst,

Does it stop passing traffic all together or you just lose connectivity to it? Same username and password shouldn't be a problem as long as both switches are added as AAA clients.

Regards,

Kanwal

Note: Please mark answers if they are helpful.

Hi Kanval,

they stop passing traffic. Both are added in ACS.

 

Regards Horst

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: