ACS 5.5 Logging Configuration

[Bin Shen]

Our ACS 5.5 does not show any logging data in Monitoring and Report Viewer even though the following has been configured.

1. System Log Collector is Local Server, which is a Linux VM.

2. All the logging categories that we need have been submitted in Log Configuration --> Logging Categories --> Global, and configured to "Log to Local Target", see attached screenshot.

3. No Remote Log Targets have been configured.

Is there anything else I need to do to enable Monitoring and Report Viewer to see the logging data?

Background: we are using TACACS authentication for all network devices, no RADIUS has been configured. No scheduled backup for ACS data has been setup yet.

Thanks.

[Bin Shen]

Suspend and Resume the Log Data Transmission fixed the problem.

[Muhammad Munir]

Hi Bin

FYI

Please have a look at the following link and make sure that you have configured the Monitoring and report viewing according to the following link:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-5/user/guide/acsuserguide/viewer_sys_ops.html#wp1052728