08-04-2020 09:34 AM
Hi All,
Please confirm my thought process for migrating ACS 5.x over to an existing 2.4 patch 9 ISE deployment.
Using SNS 3655-K9 appliances.
Am I missing anything from the process?
Thanks in advance for any replies.
Solved! Go to Solution.
08-04-2020 03:37 PM
Hi Jason,
You're on the right path but why would you migrate the ACS 5.x data to ISE 2.4 which is already EOL
You can plan to migrate to ISE 2.6 or ISE 2.7 ( BU recommended version ) directly that you have to do anyway down the line :)
if you decide to go with your original plan then make sure you go through this CSCvu42244 open caveat on ISE 2.4patch12
Lastly, you may find it helpful during the migration : How to migrate from ACS 5.x to ISE 2.x
08-04-2020 09:29 PM - edited 08-04-2020 09:29 PM
08-04-2020 03:37 PM
Hi Jason,
You're on the right path but why would you migrate the ACS 5.x data to ISE 2.4 which is already EOL
You can plan to migrate to ISE 2.6 or ISE 2.7 ( BU recommended version ) directly that you have to do anyway down the line :)
if you decide to go with your original plan then make sure you go through this CSCvu42244 open caveat on ISE 2.4patch12
Lastly, you may find it helpful during the migration : How to migrate from ACS 5.x to ISE 2.x
08-04-2020 07:56 PM
08-04-2020 09:29 PM - edited 08-04-2020 09:29 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide