04-22-2012 02:03 AM - edited 03-10-2019 07:01 PM
I have installed ACS 5.2 on a machine and I am trying to integrate with that Windows Server 2003 ( Active Directory ) . On the ACS when i do test connection it shows me sucess but when i save the setting it gives me Time error . I kept the clock and timezone of Active Directory and ACS server as same but still it gives me error . I read on one of the blog that it is better to configure NTP on a router and then sync both the devices with same NTP .
Is it necessary to configure NTP or manual config should also work ?
Solved! Go to Solution.
04-22-2012 05:21 AM
I have ran into issues like what you are seeing without using NTP. I would suggest setting up NTP and having ACS and your servers sync to that.
Sent from Cisco Technical Support iPhone App
04-22-2012 05:21 AM
I have ran into issues like what you are seeing without using NTP. I would suggest setting up NTP and having ACS and your servers sync to that.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide