We are successfully authenticating our Windows7 Wireless laptop users using Microsoft CA issued Machine Certificates to Cisco ACS Server v4.2 using EAP-TLS
However when AnyConnect 3.0.5080 is Installed and Network Access Manager (NAM) is running on the laptops NAM appears to be selecting details from the wrong certifcate for EAP-TLS authentication to ACS Server, it selects Username details from a Personal certificate on the users machine that is used by LYNC 2010 and does not use the Machine Certificate that is installed.
Attached is ACS logs that indicate this.
Will NAM always use details obtained from a Personal certificate in prefernce to a Machine certificate (if they both have the same domain name contained within them).
Anything specific I should be looking at.
Thanks in advance for any help.