ACS, enable password and Access Policies

[Mariusz00001]

Hi,

I am creating user authentiaction for switches and want to create 'per user' enable passwords. Per Cisco documents I created a shell profile with priv 15 and now I want to put it under Access Policies. Unfortunately I cannot edit/add anything over there? Am I missing anything here? When I go to Default Device Admin->Authorization and click 'create' I get

https://172.16.1.175/acsadmin/

Any other way to make enable passwords work pls?

[Mariusz00001]

Sorted, browser issue

[Javier Portuguez]

Very good.

Just for your information:

   Supported Web Client and Browsers

You can access the ACS 5.5 administrative user interface using the following web clients and browsers:

•MAC Platform

–Mozilla Firefox version 3.x

–Mozilla Firefox version 10.x

•Windows 7 32-bit

•Windows 7 64-bit

•Windows XP Professional (Service Pack 2 and 3)

–Internet Explorer version 7.x

–Internet Explorer version 8.x

–Internet Explorer version 9.x

–Internet Explorer version 10.x

–Mozilla Firefox version 3.x

–Mozilla Firefox version 8.x

–Mozilla Firefox version 9.x

–Mozilla Firefox version 10.x

–Mozilla Firefox version 17.x

–Mozilla Firefox version 21.x

–Mozilla Firefox version 22.x

The above mentioned browsers are supported only with one of the following cipher suits:

–-TLS_RSA_WITH_AES_256_CBC_SHA

–-TLS_RSA_WITH_AES_128_CBC_SHA

–-RSA_WITH_3DES_EDE_CBC_SHA

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-5/release/notes/acs_55_rn.html#wp301483

HTH.