Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I need an expert to provide some real-world feedback, please.When I worked as a network engineer, in one company 99% of typologies looked like this:There were of course more VLANs but I want to show one (let's call it VAN9) - 192.168.9.0/24When I ...
I have a thinkpad laptop (490s) with an 802.11ac card in it. I takes like 1 minute for that laptop to connect. What's worse, when it goes to sleep, wakes up - 2 minutes. Also, every 2-3 hours it disconnects and takes a few minutes to reconnect (in ma...
Cisco 9120ax. IP address is 192.168.7.113. It is connected to a L2 switch which goes to a L3 switch (Cisco) with SVIs. 1. Now here is the weird part. I can ping all the SVIs and IPs in my network from 9120ax.However, I cannot ping 9120ax from any SVI...
The AP boots up - I connect a console cable and I can see the logo of u-boot and then weird characters. Image broken? That was running an EWC image without problems, rebooted it one day and that's it...What's interesting, I can see (using CDP) that a...
1. Will I get ANY subscriptions in ASA5506-SEC-BUN-K9 pls? There is no info o cisco.com and all on-line shops just say it is ASA5506-SEC-BUN-K9...2. What the difference between ASA5506-SEC-BUN-K9 and asa5506-fpwr-bun. I am after IPS...3. Is it true t...
"Only if there's a need for the return traffic to transit the L3 switch"I really appreciate that comment. I think that is the reason I have never seen any real issues with that design. These were L3 switches so any other SVI/VLAN would not be impacte...
Thank you, very close because I put my PC to sleep but it happens after a reboot, too. To be fair - this is a 802.11ac card, no way to replace it (thanks Lenovo for doing that in a business laptop ;-)).because it was just one PC, I ended up connectin...
This is so weird. Nobody has noticed that routing is broken on a WLC? I have just tested VLANs - they work fine, I will consider upgrading but the version I've got is actually recommended by Cisco and the most stable.I am old so I thought I had miss...
Yes, I canCORE1#telnet 192.168.7.113 22Trying 192.168.7.113, 22 ... OpenSSH-2.0-Cisco-1.25[Connection to 192.168.7.113 closed by foreign host] I cannot ping/ssh/https to it from another subnet.
