Solved: ACS integration with AD

Rommel Abdon · ‎10-02-2012

Hi TechSupport,

I have downloaded ACS ISO image and test it on my vmware. I trying to integrate my acs with my active directory which is also inside my vmware.

I configured the ACS NTP server pointing to my AD server. But the connection failed when i checked the connection from the ACS to my AD server.

What could be the issue on my setup?

regards,

mbox23ron

Karsten Iwen · ‎10-03-2012

If your time is synchronized, then the second typical reason for the AD-integration not to work is a miscofigured DNS.

The ACS should use the AD-DNS and you should have working forward and reverse lookups.

Sent from Cisco Technical Support iPad App

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

View solution in original post

Karsten Iwen · ‎10-03-2012

If your time is synchronized, then the second typical reason for the AD-integration not to work is a miscofigured DNS.

The ACS should use the AD-DNS and you should have working forward and reverse lookups.

Sent from Cisco Technical Support iPad App

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

Rommel Abdon · ‎10-25-2012

thank u.

Sent from Cisco Technical Support iPhone App