11-22-2011 09:20 PM - edited 03-10-2019 06:34 PM
Hi,
I have acs server installed on windows 2003 server. I am using 2 nic , sometimes it pings to the server address but testing is fail.
It shows no authoritive response from server. When I restart my pc it starts testing again.I think its two nic problem.
Can anyone suggest me another way of doing the successfull test without restarting my pc.
Plz Help me.
11-22-2011 09:31 PM
Chandan,
The guide explains how this was tested using one nic, are both nics plugged in when you perform your test?
If so, please unplug one of the nic cards, reboot and see if this fixes your issue.
Thanks,
Tarik Admani
11-22-2011 09:40 PM
Yes, both nics are plugged in at the time of testing.Conectivity test is successful but protocol testing donot work
11-22-2011 09:45 PM
Single nic works well ...but problem is that i cannot unplug another nic and reboot . Isnt there any other way ..I tried to restart from ACS>system configuration>service control. but still it didnt work
11-22-2011 11:29 PM
This isnt supported -
There is a feature enhancment that hasnt been addressed, you will have to reach out to your account team for them to provide a roadmap with regards to this feature request.
Thanks,
Tarik Admani
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide