ACS Tippingpoint SMS integration

[moutaz_gawad]

I am configuring Tipping point SMS to authentication users from the Radius ACS, I got the session in the ACS and the error log shows ACS password invalid.

I tried to change the shared secret key and change the SMS type to be Radius IETF and IOS but all trials fail.

Tippingpoint SMS configuration has nothing but change IP - port - shared secret.

I tried also port 1812 - 1645 but both the same.

[Tarik Admani]

Moutaz,

I assume you are using acs 4.x software. Are you using network device groups on your ACS configuration, if so then you may want to check the properties of the network device group to make sure there isnt a different shared secret. Remember that the network device group settings always over ride individual settings on the clients themselves.

Thanks,

Tarik