ACS Verification

[Ibrahim Jamil]

Hi Folks

when u integrate ACS with windows AD , how to verify if ACS works fine

[andamani]

Hi,

You can check if the ACS and AD are mapped or not.

Please go to External user database > Database Group Mappings > Windows Database. If the domain is listed then the trust is present.

Also you can test by running a test authentication on the NAS with username and password present on the AD.

Hope this helps.

Regards,

Anisha

P.S.: please mark this post as answered if you feel your query is resolved. Do rate helpful posts.

[Ibrahim Jamil]

Thanks

form where to do the below:

Also you can test by running a test authentication on the NAS with username and password present on the AD

[andamani]

hi,

Please go to any of the AAA clients defined on the ACS. i.e. Router or ASA.

In case of ASA.

Run the "test aaa authentication server host "

In case of Router "test aaa group radius host username pasword < AD password>"

If the authentication is successful, then ACS and AD integration is working fine.

Hope this helps.

Regards,

Anisha

P.S.: please mark this post as  answered if you feel your query is resolved. Do rate helpful posts.

[Ibrahim Jamil]

Thanks Anisha,am using this acs for WiFi and vpn