09-09-2012 03:03 PM - edited 03-10-2019 07:31 PM
Just in the process of bringing ACS5.3 online.
see table below some times match others don't, all timezones setup correctly in ACS and devices WLCs and ASAs
any ideas?
ACS View Timestamp | ACS Timestamp | RADIUS | NAS | Details | Username | MAC/IP | Access Service | Authentication | Network Device | NAS IP Address | NAS Port ID | CTS | ACS Instance | Failure Reason |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sep 10,12 7:46:05.326 AM | Sep 10,12 7:46:05.310 AM | wipbin_client | 00-15-70-a8-e1-b9 | All Radius users | EAP-FAST (EAP-MSCHAPv2) | DEVWLC01-TACACS+_DEVWLC01 | 172.16.140.200 | CHIACS71 | ||||||
Sep 10,12 7:41:21.943 AM | Sep 10,12 7:41:21.930 AM | wipbin_client | 00-15-70-a8-e1-b9 | All Radius users | EAP-FAST (EAP-MSCHAPv2) | DEVWLC01-TACACS+_DEVWLC01 | 172.16.140.200 | CHIACS71 | ||||||
Sep 10,12 7:38:59.863 AM | Sep 10,12 7:38:59.843 AM | wipbin_client | 00-15-70-a8-e1-b9 | All Radius users | EAP-FAST (EAP-MSCHAPv2) | DEVWLC01-TACACS+_DEVWLC01 | 172.16.140.200 | CHIACS71 | ||||||
Sep 10,12 7:35:33.410 AM | Sep 9,12 9:35:48.020 PM | chntando | 124.189.181.77 | All Radius users | PAP_ASCII | CHEPIX1_pix-firewall | 172.16.7.239 | DRSACS71 | ||||||
Sep 10,12 7:34:34.560 AM | Sep 10,12 7:34:34.536 AM | wipbin_client | 00-15-70-a8-e1-b9 | All Radius users | EAP-FAST (EAP-MSCHAPv2) | DEVWLC01-TACACS+_DEVWLC01 | 172.16.140.200 | CHIACS71 | ||||||
Sep 10,12 7:33:35.106 AM | Sep 9,12 9:33:49.710 PM | chjmcgif | 138.217.68.1 | All Radius users | PAP_ASCII | CHEPIX1_pix-firewall | 172.16.7.239 | DRSACS71 | ||||||
Sep 10,12 7:32:53.423 AM | Sep 9,12 9:33:08.013 PM |
Solved! Go to Solution.
09-09-2012 05:16 PM
Hi,
The time differences seem to be coming from the DRSACS71 instance, is that server in a different timezone? The ACS view timestamp is the timestamp of when the log was received to the monitoring collector, the ACS timestamp is the time that the event took place. Can you issue a show clock on both boxes to see if the minutes are the same?
Thanks,
Tarik Admani
*Please rate helpful posts*
09-09-2012 05:16 PM
Hi,
The time differences seem to be coming from the DRSACS71 instance, is that server in a different timezone? The ACS view timestamp is the timestamp of when the log was received to the monitoring collector, the ACS timestamp is the time that the event took place. Can you issue a show clock on both boxes to see if the minutes are the same?
Thanks,
Tarik Admani
*Please rate helpful posts*
09-10-2012 12:09 AM
You are right I missed the timezone command on DRSACS71
now corrected
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide