Hi,
I have installed an ACS 5.3 (Version : 5.3.0.40.6) as standalone ACS in a customer setup. We had scheduled the backup to be done daily at a particular time. It was working fine for few weeks and after that the backup did not happen. When i had checked the ACS using CLI and tried to run a backup i got this message after i try to manually doing the backup.
% A backup or restore is already in progress
There is no such backup scheduled at this time. I am unable to move further . If anyone has faced this issue, kindly advice. Else i need to open a TAC case.
sasmyb0001/admin# sh ntp
Primary NTP : ntp1.muc
synchronised to NTP server (160.50.6.145) at stratum 3
time correct to within 85 ms
polling server every 1024 s
remote refid st t when poll reach delay offset jitter
==============================================================================
127.127.1.0 LOCAL(0) 10 l 38 64 377 0.000 0.000 0.001
*160.50.6.145 160.48.136.124 2 u 6 1024 377 196.583 1.442 6.633
sasmyb0001/admin# backup sasmyb0001 repository Backup
7 [17382]: backup-restore:backup: br_backup.c[77] [admin]: initiating backup sasmyb0001 to repos Backup
% A backup or restore is already in progress
6 [17382]: backup-restore:backup: br_cli.c[198] [admin]: error message: A backup or restore is already in progress
thanks and regards
Jim
