cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
505
Views
2
Helpful
3
Replies

Active Directory Diagnostic Tool Scheduled Run - ISE 2.7 Patch 10

JScebbz
Level 1
Level 1

Is there a suggested frequency to run the AD diagnostic tool tests? Our tests are set to run every hour. We are thinking of extending the increments to every couple of hours or longer. Thanks!  

05dcd1c1-4343-4130-9dfe-3b3e35dfdcab.PNG

3 Replies 3

I'm not sure of any specific guidance on the interval.  What is making you want to change the interval though?

Also: https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/bulletin-c25-2943876.html

We are getting a ton of alerts for the DNS SRV record query test. Supposedly this is a known issue with ISE with AD environments that have a large number of DCs. We changed it to 1 day to cut back on the noise. 

hslai
Cisco Employee
Cisco Employee

@JScebbz You may change it to run less frequently as you see fit. CSCvw81130 is a known issue so that we are unable to disable the scheduled tests. It has been addressed in ISE 3.1 Patch 8, 3.2 Patch 4, and 3.3 Patch 1 but not in ISE 2.7.