AD or LDAP groups import Limit

[rroulhac]

All,

Is there a limit for pulling AD or LDAP groups from AD/LDAP environments when usng the evaluation license with ISE 2.1?

--

Grace and Peace,

Robert E Roulhac Jr

Virtual Systems Engineer II

Cisco TSN (Technical Solutions Network)

rroulhac@cisco.com

Office: 919.5745455

[Jason Kunst · Accepted solution]

There is no difference in regards to this with eval vs purchased license

[rroulhac]

So then just to clarify, the limit for pulling LDAP groups in to ISE is 100 with eval and 100 with permanent licenses?

[hslai]

Licensing for 100 endpoints is NOT limiting the AD/LDAP groups. We would be able to add at least 1000 groups into AD/LDAP configuration.

[rroulhac]

The 100 limit is not in regards to licensing but in regards to the GUI expressed limitation. Please see the screen shot below:

The GUi says that there is a Group limit when importing LDAP groups. Why is that?

--

Grace and Peace,

Robert E Roulhac Jr

Virtual Systems Engineer II

Cisco TSN (Technical Solutions Network)

rroulhac@cisco.com

Office: 919.5745455

[hslai]

Right. That particular web UI will only display up to 100 groups. Thus, we use filters to limit each retrieval to 100 groups and select the ones we want. Then, change the filter, and repeat the process.