10-16-2017 04:57 AM
Do PSN and MnT needs any installation of their own ? or can just fetch the configuration form existing PAN configuration by simply
registering them in to Primary ISE PAN? Please assist.
Thanks,
Solved! Go to Solution.
10-17-2017 05:20 AM
Thanks Charles, it was very helpful, Only thing is that I need to install ISE on almost 18 servers. Fine
Is there any additional configuration is required?? or PSN will automatically take the role of a PSN after registration and MnT will take the role as an MnT.
10-16-2017 05:33 AM
Start here in the Admin Guide:
As far as configurations on the PSN and MnT nodes,
10-16-2017 06:09 AM
Thanks Charles.
ISE Secondary PAN can be added by registering in to the Primary PAN and we can see its registration status by Using Choose Administration > System > Deployment.
Question is how can we add MnT and like 10 PSN in to our deployment???
Is it using the same process and register each MnT and PSN like we did with secondary PAN? or some other process??
Secondly do we need to install any software on MnT or PSN, or just one time installation of Primary ISE on PAN is enough for complete deployment??
Take care.
10-16-2017 06:31 AM
Question is how can we add MnT and like 10 PSN in to our deployment???
Is it using the same process and register each MnT and PSN like we did with secondary PAN? or some other process??
Yes, same process, just choose the services needed for that node
Secondly do we need to install any software on MnT or PSN, or just one time installation of Primary ISE on PAN is enough for complete deployment??
The ISE Software must be installed and the configuration script completed prior to joining the node to your current deployment.
10-16-2017 03:58 PM
This is very helpful Charles.
So the summary is that I need to install ISE iso image on each PAN and each MnT then on each PSN, (as I have 2 PAN,2 MnT and almost 14 PSN), after wards can use the same process to register each one of them like we do for secondary ISE only with choosing relevant services on deployment page, Correct???
Also when you say " the configuration script completed prior to joining the node to your current deployment" which configuration?? do you mean setup need to run and this basic configuration or some other configuration? like need to take backup of primary ISE configuration nad restore on each MnT and PSN??
10-17-2017 04:22 AM
So the summary is that I need to install ISE iso image on each PAN and each MnT then on each PSN, (as I have 2 PAN,2 MnT and almost 14 PSN), after wards can use the same process to register each one of them like we do for secondary ISE only with choosing relevant services on deployment page, Correct???
That is correct
Also when you say " the configuration script completed prior to joining the node to your current deployment" which configuration?? do you mean setup need to run and this basic configuration or some other configuration? like need to take backup of primary ISE configuration nad restore on each MnT and PSN??
The basic configuration, ie. hostname, IP Address, etc.
10-17-2017 05:20 AM
Thanks Charles, it was very helpful, Only thing is that I need to install ISE on almost 18 servers. Fine
Is there any additional configuration is required?? or PSN will automatically take the role of a PSN after registration and MnT will take the role as an MnT.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide