cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

513
Views
10
Helpful
2
Replies
ROBERTO GIANA
Enthusiast

Any useful dashlet for device administration

Hi

Are there any useful dashlets for an ISE that is only doing TACACS/device administration?

Our plattform is authenticating,authorizing and command authorizing 7'000 network devices, that are being polled continuously by Prime and SNTC, and the default dashboard is just rediculous empty for that.

 

ISE-Dashlet.JPG

I can't even tell how many authentication requests I'm getting per second, as I could on the old ACS.

Is the ISE realy the best plattform for TACACS? It looks to me like it's more a mistake that it's TACACS capable rather than a key feature of the plattform. How are other medium sized companies doing AAA, as the ACS is running out of support?

 

Kind regards

Roberto

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cory Peterson
Contributor

Unfortunately there is not much for a TACACS/Device Admin only deployment at this point. Hopefully in the future they will release something for this. There is an Enhancement request still open on this.  CSCvg08372

 

 

View solution in original post

Jason Kunst
Cisco Employee

I would also recommend you send feedback enhancement requests thru the tool on ISE itself . This will go directly to ISE product management

View solution in original post

2 REPLIES 2
Cory Peterson
Contributor

Unfortunately there is not much for a TACACS/Device Admin only deployment at this point. Hopefully in the future they will release something for this. There is an Enhancement request still open on this.  CSCvg08372

 

 

View solution in original post

Jason Kunst
Cisco Employee

I would also recommend you send feedback enhancement requests thru the tool on ISE itself . This will go directly to ISE product management

View solution in original post

Content for Community-Ad