Anyconnect 4.3 NAM installation with Junos pulse

[Pranav Gade]

Hi All,

Currently we have deployed ISE 2.1 with Anyconnect 4.3 installation( Authentication + Posture).

We are not able to installed anyconnect 4.3 NAM module on Junos Pluse installed machine.  Can anyone tell me the procedure for installing  Anyconnect 4.3 ( NAM module ) and Junos Pluse on same machine.

Thanks in Advance.

[Rahul Govindan]

Since NAM has control of network adapters, there may be some conflict with certain software that hold the same control over the machine. Can you try installing the Junos Pulse after the Anyconnect NAM client and see if that works?

[Pranav Gade]

Hi Rahul ,

Yes we have tried this bit it didn't work. I have found the solution we have to changes registry value in windows to fixed this, below are the details.

To resolve the issue, you need to edit the Windows Registry key:

HKLM/SYSTEM/CurrentControlSet/Control/Network/MaxNumFilters

This value defines the maximum number of network filter drivers allowed on the computer.

Try to change this value to 14 (maximum value), and the Junos Pulse install should finish successfully.

Source: http://forums.juniper.net/t5/SSL-VPN/Junos-Pulse-empty-window-Win-7-64-bit/td-p/96592/page/3

Thanks for all support

[Rahul Govindan]

Thanks for reverting back with the solution !!