06-13-2016 02:15 AM - edited 03-10-2019 11:51 PM
Hi!
We have installed ISE 2.1 for AAA process for VPN users at ASA5545x. Anyconnect users authenticate successfully and we see username into RADIUS log at ISE. Also we have FirePower modules in ASA and virtual appliance FireSight 6.1 . How we can to use ISE as identity source for FireSight ?
We need to inspect traffic at FirePower based on usernames or user groups.
Thank for help.
Solved! Go to Solution.
06-24-2016 06:10 PM
Hello Serge, you can definitely do this by integrating the two via PxGrid.
Thank you for rating helpful posts!
06-24-2016 07:33 PM
I have ISE as identity feed with pxGrid in FMC. Works great
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200319-Troubleshoot-ISE-and-FirePOWER-Integrati.html
06-24-2016 06:10 PM
Hello Serge, you can definitely do this by integrating the two via PxGrid.
Thank you for rating helpful posts!
06-24-2016 07:33 PM
I have ISE as identity feed with pxGrid in FMC. Works great
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200319-Troubleshoot-ISE-and-FirePOWER-Integrati.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide