cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

371
Views
0
Helpful
2
Replies

Anyconnect user to FireSight via ISE

Hi!

We have installed ISE 2.1 for AAA process for VPN users at ASA5545x. Anyconnect  users authenticate successfully and we see username into RADIUS log at ISE. Also we have FirePower modules in ASA and virtual appliance FireSight 6.1 . How we can to use ISE as identity source for FireSight ?

We  need to inspect traffic at FirePower based  on usernames or user groups.

Thank for help. 

2 ACCEPTED SOLUTIONS

Accepted Solutions
nspasov
Cisco Employee

Hello Serge, you can definitely do this by integrating the two via PxGrid. 

Thank you for rating helpful posts!

View solution in original post

I have ISE as identity feed with pxGrid in FMC. Works great

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200319-Troubleshoot-ISE-and-FirePOWER-Integrati.html

View solution in original post

2 REPLIES 2
nspasov
Cisco Employee

Hello Serge, you can definitely do this by integrating the two via PxGrid. 

Thank you for rating helpful posts!

View solution in original post

I have ISE as identity feed with pxGrid in FMC. Works great

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200319-Troubleshoot-ISE-and-FirePOWER-Integrati.html

View solution in original post

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars



Did you miss a previous ISE webinar?

CiscoISE YouTube Channel