Assistance Needed: Initial Firmware Version for Cisco ISE

[sambathS]

Could you please help me identify the initial firmware version for Cisco ISE (Model: SECURE NETWORK SERVER 3495 V2 (UCS C220 M3))? Any guidance or resources to confirm this information would be greatly appreciated.

I appreciate any help you can provide.

[marce1000]

  - These devices are no longer supported : 
                           https://www.cisco.com/c/en/us/obsolete/security/cisco-secure-network-server-sns-3400-series.html
                           https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/eos-eol-notice-c51-737442.html

  M.

[Rob Ingram]

@sambathS the 3495 hardware is extremely old, it is EOL since 2016 https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/eos-eol-notice-c51-737032.html

It will not support any recent version of ISE. lSE 2.3 appears to be the latest version supportable on that hardware and 2.3 is EOL also. https://software.cisco.com/download/home/283801620/type/283802505/release/2.3.0

[Marcelo Morais]

Hi @sambathS ,

 as @marce1000 and @Rob Ingram already said, " ... no longer supported ... ", but:

as "an analogy" you can check the SNS 35x5 Firmware  (at Software Download > All Release > Firmware > 3 > SNS 35x5) :

Note: the SNS 35x5 is also a UCS C220, but this Appliance uses a UEFI Firmware Secure Boot option and thus cannot boot anything but ISE by design.

Hope this helps !!!