Attribute types for Cisco APs (ACS5.3)

[steve switzer]

Hi All

I am trying to get the rnetwork mgmt side of the ACS5.3 working

but in order for the Radiius to work i think i need some appropriate

attributes for the cisco wireless AP;s

Anyone any idea what these might be as i cannot seem to find them

Steve

[Tarik Admani]

Steve,

Give these a shot: I am referecing this guide - http://www.cisco.com/en/US/docs/wireless/access_point/350/configuration/guide/ap350ch8.html#wp1026271

Authorization Parameters

The following authentication server attribute value (AV) pair is  returned to the access point for an administrator login request:

This is RADIUS attribute #26, Cisco Vendor ID #9, type #1 --- string.

Cisco:Avpair = "aironet:admin-capability=write+snmp+ident+firmware+admin"

Any combination of capabilities are returned with this attribute, for example:

•Cisco:Avpair = "aironet:admin-capability=ident+admin"

•Cisco:Avpair = "aironet:admin-capability=admin"

The following is an example of a Livingston RADIUS server users file entry:

User password = "aironet"

Service-Type = Outbound

cisco-avpair = "aironet:admin-capability-ident+admin"

Tarik Admani
*Please rate helpful posts*

[Tarik Admani]

Steve,

I wanted to know if you were able to get this resolved.

Thanks,

Tarik Admani
*Please rate helpful posts*