08-15-2007 03:46 AM - edited 03-10-2019 03:20 PM
what is wrong , authentication is failed and the mesage is this:
Authentication Failed : Proxy failure
thank you
Solved! Go to Solution.
08-15-2007 03:48 AM
Go to Network Configuration > Under "Network Device Groups" click on "(Not Assigned)"
Under "(Not Assigned) AAA Servers", note down the entry name for your machine's IP address, which can be confirmed from DOS command prompt
using command "ipconfig/all"
Then Go back to Network Configuration > Under "Proxy Distribution Table", click on "(Default)"
And make sure AAA server name entry for your machine is in "Forward To" column. If its not, then move your machines entry to the column, and make sure that all other entry is under "AAA Servers". Then press "Submit + Restart"
Finally, try to authenticate few client against this ACS server.
Regards,
Prem
08-15-2007 03:48 AM
Go to Network Configuration > Under "Network Device Groups" click on "(Not Assigned)"
Under "(Not Assigned) AAA Servers", note down the entry name for your machine's IP address, which can be confirmed from DOS command prompt
using command "ipconfig/all"
Then Go back to Network Configuration > Under "Proxy Distribution Table", click on "(Default)"
And make sure AAA server name entry for your machine is in "Forward To" column. If its not, then move your machines entry to the column, and make sure that all other entry is under "AAA Servers". Then press "Submit + Restart"
Finally, try to authenticate few client against this ACS server.
Regards,
Prem
10-09-2007 01:21 AM
Hi Prem,
Why does the ACS behave like this, is this a bug? My ACS was working fine then all of a sudden I encounter this error. My ACS entry was already in the "Forward to" column so I just pressed "Submit & Restart" and it worked fine.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide