05-04-2013 02:04 PM - edited 03-10-2019 08:23 PM
Hello Everyone,
I am getting "Authentication failed: 22040 Wrong password or invalid shared secret" message on ISE whenever any user wants to join the network.
Any info on this will be appreciated !
Solved! Go to Solution.
05-04-2013 02:19 PM
Possible Causes is the user or device may not be supplying the correct credentials or RADIUS key to match with the external authentication source.
Please verify that the user credentials that are entered on the client machine are correct, and verify that the RADIUS server shared secret is correctly configured in both the NAD and Cisco ISE (they should be the same).
05-04-2013 02:07 PM
Obvious question: have you defined the relevant network device in ISE?
is this a new installation or one that has previously been operational?
What release / versions are being run?
Have you run any of the migration tools from ACS?
05-04-2013 02:19 PM
Possible Causes is the user or device may not be supplying the correct credentials or RADIUS key to match with the external authentication source.
Please verify that the user credentials that are entered on the client machine are correct, and verify that the RADIUS server shared secret is correctly configured in both the NAD and Cisco ISE (they should be the same).
05-07-2013 10:39 AM
Hello Ravi.....
Your answer is perfect..It really helped me out.....
Thank you...........
02-17-2021 06:17 AM
my credentials have not been changed and I was able to connect, with no problem, yesterday
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide