Blue coat proxy integration with ISE 2.4

[ranjit123]

Hello All,

We need to integrate Bluecoat proxy with ISE 2.4 for radius authentication and authorization has any one done the same can some one explain me the flow and what attributes should i match in ISE for the same

[Aravind Ravichandran · Accepted solution]

Hi Ranjit,

Please try this out.

Add Bluecoat Proxy under Radius Vendor in ISE Dictionary with vendor id 14501

Under dictionary attribute add 2 new attribute with

Attribute Name : Blue-Coat-Authorization

Data Type: UINT32

Direction: Both

ID: 2

Another attribute with Attribute Name: Blue-Coat-Group

Data Type: UINT32

Direction: Both

ID: 1

Under Authorization profile,use network device profile as Bluecoat,then in Advance attribute call the above 2 attributes as:

Blue-Coat-Authorization = 2
Blue-Coat-Group = 2 

https://community.cisco.com/t5/identity-services-engine-ise/bluecoat-proxy-ssg-300-25-administration-access-using-ise/m-p/3715526/highlight/true

[ranjit123]

Hello Thanks a lot for reply

where to match shell privileges..

[Aravind Ravichandran]

Privilege levels will be configured under authorization profile for Radius.