Solved: Broken logins

Dustin Anderson · ‎05-01-2017

ok, so I restored a test unit from a backup, and now all logins using AD credentials are failing.

I verified the node is joined to AD, and can test the user credentials. When I log in using AD, I get this error in the log.

Network Access Process failure for user

If I click on the name, for some reason all the menu access is showing hide.

I made a test menu group with all set to show, and it still hides it. This all worked fine before the restore.

Any ideas of what to check would be appreciated.

Dustin Anderson · ‎05-01-2017

Well, think I fixed this the hard way, must be a bug. This was on 2.2 patch 1. Backup was from base 2.2

Rolled back to 2.2 and login worked, reinstalled patch 1 and login worked. May try to restore again tomorrow to see if I can recreate it, or just not worry about it.

View solution in original post

Dustin Anderson · ‎05-01-2017

Well, think I fixed this the hard way, must be a bug. This was on 2.2 patch 1. Backup was from base 2.2

Rolled back to 2.2 and login worked, reinstalled patch 1 and login worked. May try to restore again tomorrow to see if I can recreate it, or just not worry about it.