check and modify ISE SNMP comunity

[nicanor00]

Hi

I have ISE 3315-k9 version 1.1

what is the procedure to view and modify SNMP community   

Thanks              

[Jatin Katyal]

You may check the below listed link:

http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_man_network_devices.html#wp1108318

From the CLI, you can run a command:

ise/admin(config)# snmp-server community new ro

~BR
Jatin Katyal

**Do rate helpful posts**

[nicanor00]

Thank for your answer

I am unable to access the ISE by CLI

I used the same password that I use with the browser but it is not work

The link that you send me is talking only about device SNMP comunity

But I nedd ISE SNMP community himself because I want to add ISE on cisco prime

That is why I need the ISE SNMP community

Please advise

[Jatin Katyal]

For accessing Command Line Interface (CLI) of ISE, we need a different admin account. If no one is able to log into the Cisco ISE system because the administrator password has been lost, forgotten, or compromised, we can only use the Recovery DVD to reset the ISE CLI admin password.

Resetting the Administrator Password for a Cisco ISE Appliance

http://www.cisco.com/en/US/docs/security/ise/1.1.1/installation_guide/ise_postins.html#wp1189908

For SNMP, you can create a new community for ISE and PI under network devices.

~BR
Jatin Katyal

**Do rate helpful posts**