cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2646
Views
0
Helpful
2
Replies

Check snmp community

SEKII
Level 1
Level 1

Hi,

We are have many cisco devices with enabled snmp.
How i can remote check (whit software) all devices for snmp community - read or write access it?
Thanks.

1 Accepted Solution

Accepted Solutions

balaji.bandi
Hall of Fame
Hall of Fame

you can do couple of steps :

 

1. First scan all the network devices with snmp port 161 open or closed.

2. depends on the results you can use that device to do snmpwalk with read community

3. Same as write community to confirm.

4. compare both the results read and write access.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

2 Replies 2

balaji.bandi
Hall of Fame
Hall of Fame

you can do couple of steps :

 

1. First scan all the network devices with snmp port 161 open or closed.

2. depends on the results you can use that device to do snmpwalk with read community

3. Same as write community to confirm.

4. compare both the results read and write access.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Thanks. Will try.