Cisco ACS 3.3 and user defined VSAs

[dfranjoso]

Hello All,

I am currently deploying Cisco ASR9K BNG solution and it needs to be integrated with a Cisco ACS 3.3 (yes that old .. going to migrate to new product in the future) equipment. There are several specific attributes need that are not on the base config of the ACS 3.3 but it seems that i can configure them manually:

'

In addition to supporting a set of predefined RADIUS vendors and vendor-specific attributes (VSAs), Cisco Secure ACS supports RADIUS vendors and VSAs that you define. Vendors you add must be IETF-compliant; therefore, all VSAs that you add must be sub-attributes of IETF RADIUS attribute number 26.

'

This is from the ACS 3.3 configuration manual.

I have never done this user defined VSAs. Anyone has experience with this ? Will this work ?

Thanks!

David

[Jatin Katyal]

What VSAs you'd like to import? Are you running ACS for windows (software version) or solution engine?

You can add/import VSAs using Csutil (only in windows) and RDBMS. It'll be easy for cummunity to help you once you will come up with a specific requirement/VSA.

For instance:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/3.3/user/guide/ae.html#wp365780

Jatin Katyal
- Do rate helpful posts -