06-26-2014 03:32 AM - edited 03-10-2019 09:49 PM
hi ,
i have configured my ACS 4.2 to assigne static ip addres to vpn users (172.17.17.100) ,the acs assigne the ip address but it gives the users the default subnet mask (255.255.0.0) .
i want to change the mask to be 255.255.255.0 .
it's possible ? on the user atribute there is no option called subnet mask.
thanks
06-26-2014 09:59 AM
Could you share the ACS 4.2 configuration for this?
Rate if Useful :)
Sharing knowledge makes you Immortal.
Regards,
Ed
06-27-2014 07:54 AM
hi ,
i dont have access to the acs now but it's simple ;,when we add a user there is a field called static ip address .
06-27-2014 01:59 PM
Ok got it, let me check it out for you.
Regards
Ed
06-29-2014 05:40 PM
hi edwardcollins,
is there a new ?
06-30-2014 01:25 AM
I will check the attribute available for the ASA.
Regards
Ed
07-01-2014 06:04 AM
hi,
i found it ,
RADIUS (IETF) ###[009] Framed-IP-Netmask attribute.
we must go to interface configuration -->>RADIUS (IETF) --> ans select Framed-IP-Netmask attribute. for user .
07-02-2014 10:00 AM
Good, have you tested it?
Regards,
Ed
06-27-2014 02:32 PM
Could you tell what you are using for VPN termination, is it an ASA?
Regards
Ed
06-27-2014 03:39 PM
hi,
yes a'm using ASA
thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: