Cisco ACS 5.3 - Radius attributes and 'Device Administration/Shell Profiles'

[phipham-equens]

Can anyone help me with the following ?

Under 'Policy Elements/Authorization and Permissions/Network Access/Authorization profiles' I have defined a profile and the following Attribute:
Attribute = F5-LTM-User-Role
Type = Unsigned Interger 32
Value = 300.

My question is:
How can I define the same as above using 'Device Administration/Shell Profiles' ?

There is a Custom Attributes tab but I cannot figure out how to specify the 'Type' field. (Under Custom Attributes tab there is only space for 2 fields and not 3 fields).

[Tarik Admani · Accepted solution]

Hi

Just for my understanding are you trying to use tacacs or radius?

Shell profiles are used for tacacs and authorization profiles are used for radius.

Thanks

Tarik

[phipham-equens]

Thanks for your help !

(I use Radius for access to a device).

[Tarik Admani]

Not a problem, please do not forget to mark this as resolved so future users will be able to find this was resolved.

thanks,

Tarik Admani
*Please rate helpful posts*