09-19-2012 05:23 AM - edited 03-10-2019 07:33 PM
Can anyone help me with the following ?
Under 'Policy Elements/Authorization and Permissions/Network Access/Authorization profiles' I have defined a profile and the following Attribute:
Attribute = F5-LTM-User-Role
Type = Unsigned Interger 32
Value = 300.
My question is:
How can I define the same as above using 'Device Administration/Shell Profiles' ?
There is a Custom Attributes tab but I cannot figure out how to specify the 'Type' field. (Under Custom Attributes tab there is only space for 2 fields and not 3 fields).
Solved! Go to Solution.
09-19-2012 05:57 AM
Hi
Just for my understanding are you trying to use tacacs or radius?
Shell profiles are used for tacacs and authorization profiles are used for radius.
Thanks
Tarik
09-19-2012 05:57 AM
Hi
Just for my understanding are you trying to use tacacs or radius?
Shell profiles are used for tacacs and authorization profiles are used for radius.
Thanks
Tarik
09-19-2012 06:16 AM
Thanks for your help !
(I use Radius for access to a device).
09-19-2012 07:56 AM
Not a problem, please do not forget to mark this as resolved so future users will be able to find this was resolved.
thanks,
Tarik Admani
*Please rate helpful posts*
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide